鋁板生產廠家噴涂鋁合金型材具有的耐蝕性和耐候性，合金鋁板廠家堅固耐用，外觀裝飾好，生產工藝比陽出彩氧化簡單，環保安全等特點，在建筑、裝潢、運輸?shù)刃袠I(yè)得到廣泛應用。
Aluminum alloy profiles produced by aluminum plate manufacturers have excellent corrosion resistance and weatherability. The aluminum alloy plate manufacturers are strong and durable, with good appearance and decoration, and the production process is simpler than that of anodic oxidation, environmental protection and safety. They are widely applied in building, decoration, transportation and other industries.
鋁板生產廠家在噴涂前處理中建議進行化學清洗和浸蝕，清除其表面粘附的油脂、自然氧化膜和灰塵等污染物，使鋁合金基體裸露出來，形成均勻的活化表面，這是保證鉻酸鹽轉化膜質量和噴涂質量的關鍵。
Aluminum manufacturers must chemical cleaning and etching before the spraying process, remove the surface adhesion of grease, dust and other pollutants and natural oxide film, the Aluminum Alloy matrix exposed, the formation of surface activation uniform, this is the key to guarantee the quality of chromate conversion coating and spraying quality.

酸蝕脫脂工藝將傳統工藝的脫脂、鹼蝕、除污出光三道工序合為一道工序，降低成本和節省能源，經處理後的鋁合金表面平滑光潔，保持鋁合金原有的光澤，鋁材溶解損耗量和槽液沉淀少，與鉻酸鹽轉化處理配套性能好，非常適用于鋁合金型材噴涂前的表面處理。
Acid etched degreasing process for the traditional process of degreasing, alkaline etching and cleaning out light three processes into one process, reduce cost and save energy, smooth Aluminum Alloy smooth surface treatment, maintain the original luster Aluminum Alloy, dissolved aluminum loss and bath and less precipitation, and chromate conversion treatment good matching performance, particularly suitable for surface treatment of Aluminum Alloy profile before spray painting.
鋁板生產廠家鋁合金型材噴涂前處理工藝工藝流程：
The process flow of pretreatment of aluminum alloy profiles for aluminum plate manufacturers:
工件裝掛→酸蝕脫脂→水洗→水洗→鉻酸鹽轉化處理→水洗→純水洗→瀝水→烘干→噴涂→固化。鋁板生產廠家在噴涂前處理生產線分為全自動噴淋立式線和間歇式全浸漬臥式線兩種。
The workpiece hanging, acid etched degreasing, water washing, water washing, water washing, chromate conversion treatment, washing, draining, drying, spraying, curing. The aluminum plate manufacturers are divided into two kinds of automatic spray vertical lines and intermittent full impregnated horizontal lines.
立式線適用于批量大、形狀簡單的工件，生產效率高，處理質量穩定，缺點是設備復雜、投資大,電地暖;臥式線適宜處理形狀復雜的工件，投資少，應用廣，缺點是處理速度較慢、生產效率低。
The vertical line is suitable for large batch, simple shape, high production efficiency, processing quality and stability, disadvantage is the complicated equipment, large investment, electric heating; the horizontal line is suitable for workpieces with complex shapes, less investment, wide application, the disadvantage is slow processing rate and low production efficiency.
以上的內容相信大家大多能明白了，如果你還有問題，請點擊我們的官方網站鋁卷生產廠家http://ssstlc.com，或者是來電咨詢！
I believe you can understand all of the above contents. If you have any questions, please click on our official website http://ssstlc.com, or call for consultation.