花紋鋁板的運用較為廣泛，三條筋、五條筋、指針型花紋鋁板都是常見的品種，在建筑、交通、裝修、制冷設備等范疇大多能看到花紋鋁板的身影。今天 ，材信鋁卷生產廠家給大家簡單說一說選擇花紋鋁板的訣竅。
The use of decorative aluminum plates is very extensive. Three bars, five bars and pointer pattern aluminum plates are common varieties. In the field of building, transportation, decoration, refrigeration equipment and so on, we can see the figure of aluminum pattern. Today, the manufacturer of material letter aluminum rolls simply said the knack of choosing the pattern aluminum plate.
看加工。正規大廠出產的花紋鋁板，用料講究，板面亮光亮堂，花紋清楚規整，鋁板平整，表面無油污、劃傷、折傷等缺陷；而小廠出產的花紋鋁板，用廢鋁做材料，表面暗淡無光，花紋不清楚、不規整，板面不平整，功用不合格，質量差。
Look at the processing. Formal large production pattern aluminum, exquisite material, surface light bright, clear regular pattern, flat plate, no oil, surface scratches, broken and other defects; and the small factory production pattern aluminum, with aluminum as the material, the surface pattern is not clear, dim and dark, irregular, the surface is not smooth, the function of substandard quality. Poor.

看厚度。優良花紋鋁板所選的板材，其厚度、強度、氧化膜厚度等都應該符合國家標準：鋁板厚度≥1.2mm，抗拉強度≥157牛/平方毫米，屈服強度≥108牛/平方毫米，氧化膜厚度≥10微米。如果達不到標準，就是劣質花紋鋁板。
Look at the thickness. The selected pattern aluminum plate quality, thickness and strength, the thickness of the oxide film should comply with the national standard: aluminum plate with thickness not less than 1.2mm, the tensile strength of more than 157 cattle / mm2, yield strength more than 108 cattle / mm2, film thickness of 10 microns. If it does not reach the standard, it is a bad pattern of aluminum.
看效能。從廠家的生產線到企業的車間，中心要經歷打包、裝車、運送 、貯存、開包許多環節，花紋鋁板不免出現氧化、劃傷之類的殘損，規劃大、效能好的供貨商會為用戶供應退、換效能，為用戶處理后顧之慮。
Look at the efficiency. The workshop to the enterprise from the factory production line, the center will experience packing, loading, transporting, storing, unpacking many links, unavoidable scratch pattern aluminum oxidation, such as damage, planning, performance good suppliers to provide the user back, for the performance, for the user to worry.
看價格?；y鋁板分為純鋁與合金兩種，其價格天然也不一樣。正規廠家出產的花紋鋁板加工費一噸在幾千元，合金價格要高于純鋁，正規廠家的鋁板價格比起劣質鋁板要高20%-30%左右。企業在收購時，切忌不行單比價格，買到不合格產品，則悔之晚矣。
Look at the price. The decorative aluminum plate is divided into two kinds of pure aluminum and alloy, and their price is not the same. The production of pattern aluminum plates produced by regular factories costs a ton of thousands of yuan, and the price of alloy is higher than that of pure aluminum. The price of aluminum plates of regular manufacturers is about 20%-30% higher than that of inferior aluminum plates. Enterprises in the acquisition, not only avoid the price, buy substandard products, it is too late.
鋁棒生產廠家銷售的的純鋁板、合金鋁板、花紋鋁板、拉絲鋁板、鋁片、鋁帶、幕墻鋁材品種齊全、價格合理，如果您需要了解更多關于材信鋁板價格的內容。
Aluminum rod manufacturers sell pure aluminum, aluminum alloy, decorative aluminum, aluminum wire, aluminum, aluminum and curtain wall aluminum products, and the price is reasonable. If you need to know more about the price of the aluminum letter,