鋁卷的包裝應根據產品的規(guī)格、尺寸選擇包裝箱和包裝方式，對于箱式包裝，產品人箱后不能被擠傷或竄動。包裝箱的制作材料可以是木板、多層板、纖維板、金屬等材料。包裝箱應清潔整齊，有足夠的強度保證在貯運過程中不變形、不破損。木制包裝箱中釘子呈邁步排列，釘尖不能外露，應盤倒，避免在貯運過程中釘帽、釘尖扎傷鋁箔，底托的高度應滿足叉車運輸的要求。鋁卷產品檢驗合格并蓋上檢印后，外面應纏一層結實的中性或弱酸性材料，接頭處用膠帶或標簽封口。在端面墊上軟襯墊.以保護鋁卷的端面。加干燥劑，套上塑料袋，將塑料袋兩端超出鋁卷的部分塞人管芯，用尺寸合適的塑料堵頭封口后放人包裝箱。產品裝箱后，上面再蓋上一層防潮紙或塑料布，放人裝箱單后，方可加蓋并用鋼帶封箱，鋼帶應捆扎牢固。
The packaging of aluminum coils should be based on the specifications and dimensions of the product, and the packaging box and packaging method should be selected. For box packaging, the product should not be squeezed or moved behind the box. The materials used for making packaging boxes can be wooden boards, multi-layer boards, fiberboards, metal, and other materials. The packaging box should be clean and tidy, with sufficient strength to ensure no deformation or damage during storage and transportation. The nails in the wooden packaging box are arranged in steps, and the nail tips should not be exposed. They should be turned upside down to avoid damaging the aluminum foil during storage and transportation. The height of the bottom support should meet the requirements of forklift transportation. After the aluminum coil product passes the inspection and is stamped with the inspection seal, a layer of strong neutral or weakly acidic material should be wrapped around the outside, and the joints should be sealed with tape or labels. Place a soft pad on the end face to protect the end face of the aluminum coil. Add desiccant, cover the plastic bag, and stuff the part of the plastic bag that exceeds the aluminum roll at both ends into the tube core. Seal it with a suitable sized plastic plug and place it in the packaging box. After the product is boxed, a layer of moisture-proof paper or plastic cloth should be covered on top, and placed on the packing list before it can be stamped and sealed with steel straps. The steel straps should be securely tied.
鋁卷的常規(guī)包裝：對于厚度大于0.05mm以上且為硬狀態(tài)的鋁卷，一般可采用井字架包裝，其包裝應符合貯運的要求。井字架為木制，上下各為兩根木方組成，下木方的高度應滿足又車工作的要求，上木方上面制成與卷徑向對應的圓弧形狀，上下木方用螺桿固定，螺桿長度應低于上木方的圓弧面以避免扎傷鋁卷。產品檢驗合格并蓋上檢印.，鋁箔卷外面應纏一層結實的中性或弱酸性材料(一般采用高發(fā)布)，并放人裝箱單，搭接處用膠帶粘牢。在端面墊上軟襯墊.以保護鋁箱卷的端面。
Conventional packaging of aluminum coils: For aluminum coils with a thickness greater than 0.05mm and in a hard state, they can generally be packaged using a well shaped frame, and their packaging should meet the requirements for storage and transportation. The well shaped frame is made of wood, consisting of two wooden blocks at the top and bottom. The height of the lower wooden block should meet the requirements of the lathe work. The upper wooden block is made into an arc shape corresponding to the radial direction of the coil, and the upper and lower wooden blocks are fixed with screws. The length of the screw should be lower than the arc surface of the upper wooden block to avoid damaging the aluminum coil. The product inspection is qualified and stamped with an inspection seal. Firstly, a layer of strong neutral or weakly acidic material (usually high release) should be wrapped around the outer surface of the aluminum foil roll, and placed on the packing list. The overlap should be firmly adhered with tape. Place a soft pad on the end face to protect the end face of the aluminum box coil.
其次，加干燥劑，用整張塑料布包裹整個料卷，搭接處外層塑料布口向下并用膠帶粘牢，將塑料布兩端多余部分塞人管芯。
Secondly, add desiccant and wrap the entire material roll with a whole sheet of plastic cloth. The outer layer of plastic cloth at the overlap should be facing downwards and firmly adhered with tape. The excess parts at both ends of the plastic cloth should be stuffed into the pipe core.
用尺寸吻合的防雨硬紙板分別沿圓周方向包裹整個鋁卷和封閉兩端面，端面與圓周相接處及所有縫隙均用膠帶粘牢。將包好的鋁箔卷放到井字架上并沿圓周方向用鋼帶固定，鋼帶應捆扎牢固。在包裝好的鋁箔卷端面上各貼一張箱牌。除考慮箱子和井字架的承重、包裝成本外，還應考慮運輸方式及用戶的運輸裝卸能力，通常我公司每個鋁卷的包裝重量為2.6噸
Wrap the entire aluminum coil and seal both ends along the circumference with rainproof cardboard that matches the size, and use adhesive tape to fix the joints and all gaps between the end face and the circumference. Place the wrapped aluminum foil roll on the well frame and secure it with steel straps along the circumference, which should be securely tied. Stick a box label on each end of the packaged aluminum foil roll. In addition to considering the load-bearing and packaging costs of boxes and grills, we should also consider the transportation method and the user's transportation and loading and unloading capacity. Usually, our company's packaging weight for each aluminum coil is 2.6 tons
鋁卷出口包裝方式：鋁卷是出口量較大的產品，出口包裝通常是采取了熏蒸井字架方式，外部用鋼帶固定，鋁卷外部有雙層防潮雨布，內部防止防潮劑，采取密封式包裝，適合于海運。
Aluminum coil export packaging method: Aluminum coil is a product with a large export volume. Export packaging usually adopts the fumigation well shaped frame method, with the outer part fixed with steel strips. The aluminum coil has a double layer of moisture-proof rain cloth on the outer part and moisture-proof agent on the inner part. Sealed packaging is adopted, suitable for sea transportation.
This article is a friendly contribution from aluminum coil manufacturers. For more information, please click on: http://ssstlc.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
