According to customer requirements, a thickness of 0.5 can be transported through drum packaging? 4.5mm aluminum strip coil, or aluminum strip coil with a thickness of 0.6mm or less in a hard state. When using this method, first immerse a layer of aluminum strip, then wrap it with kraft paper and a layer of plastic cloth, insert the cloth head into the tube, and then use the iron waist to form a triangle in the axial direction. Tighten it with two iron waists in the circumferential direction. Then firmly fix the aluminum roller. Place it in a serrated packaging rack and secure it. The logo of the aluminum coil should be written on the aluminum coil or label, and should indicate the same content and precautions as the above method.

壓花鋁板可生產1系列，3系列，5系列和6系列鋁合金產品，包括1,060壓紋鋁板，3003壓紋鋁板，5052壓紋鋁板和6061壓紋鋁板。 產品種類繁多，可以滿足不同客戶的需求。 所有系列的壓紋鋁板均具有良好的耐腐蝕性，出眾的焊接性能，高強度，良好的可成型性以及易于加工的特點。 該公司具有快速的線淬火功能，不僅可以確保產品質量，還可以提高裝飾鋁板的加工性能。 由有圖案的鋁板制成的樓梯不僅具有防滑功能，而且還具有防腐蝕和防腐蝕功能。

Embossed aluminum plates can produce 1 series, 3 series, 5 series, and 6 series aluminum alloy products, including 1060 embossed aluminum plates, 3003 embossed aluminum plates, 5052 embossed aluminum plates, and 6061 embossed aluminum plates. There are a wide variety of products that can meet the needs of different customers. All series of embossed aluminum plates have good corrosion resistance, excellent welding performance, high strength, good formability, and easy processing characteristics. The company has a fast line quenching function, which not only ensures product quality but also improves the processing performance of decorative aluminum plates. The stairs made of patterned aluminum plates not only have anti slip function, but also have anti-corrosion and anti-corrosion functions.

對于壓花鋁板的狀態，我們根據全硬，半硬和軟狀態對其進行區分。 正常的軟態主要是指鋁板的O態，全硬的彎曲效果基本上不好。 在鋁板的狀態下，通常H18，H19，H38等都是完全硬的，處于半硬狀態的鋁板基本上可以折疊，而H24是半硬的。

For the state of embossed aluminum plates, we distinguish them based on their fully hard, semi hard, and soft states. The normal soft state mainly refers to the O state of the aluminum plate, and the bending effect of fully hard is basically not good. In the state of aluminum plates, H18, H19, H38, etc. are usually completely hard. Aluminum plates in a semi hard state can basically be folded, while H24 is semi hard.

通常在O狀態下彎曲是沒有問題的，但是由于在這種狀態下的鋁板太軟，我們通常很少使用在這種狀態下的鋁板彎曲。 同時，在選擇鋁板時，還應注意純鋁板與合金鋁板的區別。 通常，純鋁的硬度不太高。 具體地，對于純鋁彎曲，可以使用1100、1050、1060等。 建議使用1100H26。

Usually, bending in the O state is not a problem, but due to the softness of the aluminum plate in this state, we usually rarely use aluminum plate bending in this state. At the same time, when selecting aluminum plates, attention should also be paid to the difference between pure aluminum plates and alloy aluminum plates. Usually, the hardness of pure aluminum is not very high. Specifically, for pure aluminum bending, 1100, 1050, 1060, etc. can be used. It is recommended to use 1100H26.

鋁合金板的硬度會更好。 通常，鋁板（例如3003、3005和5052）可用于彎曲。 如果6061、2024、7075的硬度過高，尤其是在T6狀態下，則不應彎曲，除非先加熱然后折疊，否則好鋁板和差鋁板的區別在于氧化性能，耐受性， 表面效果，晶體精度在均勻性和穩定性方面存在差異。 彎曲效果沒有太大不同。 如果對鋁板表面進行了噴漆，則建議不要將其質量過高。 您可以考慮使用3003-H26、3005H24或5052H34。

The hardness of aluminum alloy plates will be better. Typically, aluminum plates (such as 3003, 3005, and 5052) can be used for bending. If the hardness of 6061, 2024, and 7075 is too high, especially in the T6 state, they should not be bent unless heated first and then folded. Otherwise, the difference between good and poor aluminum plates lies in their oxidation performance, tolerance, surface effect, crystal accuracy, uniformity, and stability. The bending effect is not much different. If the surface of the aluminum plate is painted, it is recommended not to have its quality too high. You can consider using 3003-H26, 3005H24, or 5052H34.