鋁板上白點的原因以及如何處理？針對這個問題，我們鋁板生產廠家可以做以下內容的分析：
　　The cause of white spot on aluminum plate and how to deal with it? In view of this problem, our aluminum plate manufacturers can do the following analysis:
　　鋁板生產廠家的鋁板具有良好的金屬活動性，容易被氧化，但是由于它在氧化時可以形成細小的氧化鋁膜（白色），因此可以防止與鋁的連續反應，因此這種現象也是正常的。
　　Aluminum plate manufacturers of aluminum plate has strong metal activity, easy to be oxidized, but because it can form a small alumina film （white） during oxidation, so it can prevent continuous reaction with aluminum, so this phenomenon is normal.
　　對于外觀要求嚴格的鋁板，如何防止鋁板外表面出現白點，使產品光滑光亮，不僅與加工技術有關，而且與后來的外觀加工技術息息相關。
　　For the aluminum plate with strict appearance requirements, how to prevent the appearance of white spots on the surface of the aluminum plate and make the product smooth and bright is not only related to the processing technology, but also closely related to the later appearance processing technology.
　　鋁板生產廠家在對大型鋁產品進行陽出彩氧化處理時，加工完成后表面會出現白點，尤其是氧化鋁板更為顯著。讓我們分析這種情況下的因素。
　　When aluminum plate manufacturers anodize large aluminum products, white spots will appear on the surface after processing, especially aluminum oxide plate. Let's analyze the factors in this case.

　　實際上，主要因素很簡單：鋁板被氧化后，沖刷不完全，導致鏜孔后表面上出現白點。解決方法是加強氧化后的精練，并嘗試使用水槍將其完全沖洗。同時，在將來，您應注意保持外觀，并嘗試使本產品遠離其他產品并自然干燥。
　　In fact, the main factor is simple: after the aluminum plate is oxidized, it is scoured incompletely, resulting in white spots on the surface after boring. The solution is to enhance the scouring after oxidation and try to flush it completely with a water gun. At the same time, in the future, you should take care to maintain the appearance and try to keep this product away from other products and dry naturally.
　　換句話說，如果要更好地控制鋁板上白點的出現，不僅要在產品加工過程中注意產品的外觀，還要在外觀加工中注意預防，并規范嚴格的加工工藝和加工工藝，防止白斑的形成。干凈的白色斑點，酸洗和堿洗都可以，但是您需要控制濃度，或噴涂油漆以阻止鋁和氧氣被觸摸。
　　In other words, if we want to better control the appearance of white spots on the aluminum plate, we should not only pay attention to the appearance of the product in the process of processing, but also pay attention to prevention in the appearance processing, and standardize strict processing technology and processing technology, to prevent the formation of white spots. Clean white spots, pickling and alkali are fine, but you need to control the concentration, or spray paint to prevent aluminum and oxygen from being touched.
　　更多內容的了解就來我們網站ssstlc.com進行咨詢吧！
　　For more information, come to our website ssstlc.com for consultation!