1.易實現自動化生產。由于鋁型材的電泳涂裝在水性電泳槽中進行，與陽出彩氧化、電解著色工藝類似，處理時間短，容易實現整個工藝的流水線作業(yè)。
1. Easy to realize automatic production. Because the electrophoretic coating of aluminum profile is carried out in the aqueous electrophoretic tank, which is similar to the anodic oxidation and electrolytic coloring process, the processing time is short, and it is easy to realize the assembly line operation of the whole process.
2.涂膜均勻致密。由于鋁型材的電泳涂料的高泳透力，可使復雜形狀的型材亦獲得均勻的涂膜，同時通過調整電量可控制膜厚。

2. The coating is uniform and dense. Due to the high penetration of the electrophoretic coating of aluminum profile, the profile with complex shape can also obtain a uniform film, and the film thickness can be controlled by adjusting the electric quantity.
3.涂料的利用率高。由于粘度低，工件帶出較少，而且電泳工件可用水洗，回收裝置的利用使電泳涂裝的涂料利用率高達95%以上。
3. High utilization rate of coating. Due to the low viscosity, less workpieces are brought out, and the electrophoretic workpieces can be washed with water. The utilization of the recovery device makes the coating utilization rate of electrophoretic coating up to more than 95%.
4.安全性和環(huán)保性。由于電泳涂料的水稀釋，固體份低，溶劑含量少是環(huán)保型涂料，且免除了火災的危險，工人健康也有保障。
4. Safety and environmental protection. Due to the water dilution, low solid content and low solvent content of electrophoretic coating, it is an environmental friendly coating, which eliminates the risk of fire and ensures the health of workers.
5.涂膜質量好。丙烯酸樹脂用氨基樹脂固化，保證了涂膜的高裝飾及高耐腐蝕性，同時由于樹脂高度透明，有效地突出了鋁型材的金屬質感，根據需要還可得到亞光、沙面、珠光等裝飾效果。
5. Good coating quality. Acrylic resin is cured with amino resin, which ensures the high decoration and high corrosion resistance of the film. At the same time, due to the high transparency of the resin, it effectively highlights the metal texture of aluminum profile, and can also get Matt, sand surface, pearlescent and other decorative effects as needed.
6.和通常的電解著色封孔工藝相比，具有省時，節(jié)省人力的特點，電泳涂膜無需封孔，避免了由于封孔不好帶來的裂紋等毛病。
6. Compared with the usual electrolytic coloring sealing process, it has the characteristics of saving time and manpower. The electrophoretic coating does not need to seal the hole, avoiding the defects such as cracks caused by poor sealing.
7.可自由控制涂膜的厚度，國內外通常控制7μm和12μm兩檔。
7. The thickness of the coating film can be controlled freely, which is usually controlled at home and abroad μ M and 12 μ M two gears.
8.由于電泳層透明光亮，因此要求鋁鑄錠質量高，擠壓材表面平滑，機械缺陷少，對氧化著色工藝要求管理嚴格，因為明顯微小的缺陷和沾污都會在透明漆下暴露無遺。
8. As the electrophoresis layer is transparent and bright, it is required to have high quality of aluminum ingot, smooth surface of extruded material and few mechanical defects. It is required to strictly manage the oxidation coloring process, because any small defects and contamination will be exposed under the transparent paint.
9.對電泳工藝管理要求高，以提高鋁型材的成品率。
9. High requirements for electrophoresis process management to improve the yield of aluminum profiles.