在鋁型材生產中，測量工具就像檢驗員手中的武器。如果武器處于半癱瘓或損傷狀態，測試結果毫無意義，對產品質量沒有監督作用。因此，量具的保養是非常重要的。以下是鋁板生產廠家測量工具(通用測試工具)的一些維護規范:
　　In the production of aluminum profiles, measuring tools are like weapons in the hands of inspectors. If the weapon is in a semi paralyzed or damaged state, the test results are meaningless and have no monitoring effect on product quality. Therefore, the maintenance of measuring tools is very important. The following are some maintenance specifications for measuring tools (general testing tools) of aluminum plate manufacturers:
　　1.量具存放處應保持清潔和干燥，遠離振動和腐蝕性氣體，遠離溫度和磁場大的地方。量具存放于盒內清潔干燥，勿存放其它雜物。

　　1. The storage place of measuring tools shall be kept clean and dry, away from vibration and corrosive gas, and away from places with high temperature and magnetic field. Store the measuring tools in the box clean and dry, do not store other sundries.
　　2.使用測量工具后，清洗表面污跡和鋁屑，松開緊固裝置，長時間(1個月以上)不使用時，在測量表面涂防銹油。當量具不使用時，應將其放入保護箱內，由專人專職使用，并憑年檢記錄做好量具工作。
　　2. After using the measuring tools, clean the surface stains and aluminum chips, loosen the fastening device, and when it is not used for a long time (more than 1 month), coat the measuring surface with antirust oil. When the measuring tool is not used, it shall be put into the protection box and used by special personnel, and the measuring tool work shall be well done with the annual inspection record.
　　3.不要用油石、砂布摩擦量具的測量面、測量面和標記部分。
　　3. Do not rub the measuring surface, measuring surface and marking part of the measuring tool with oilstone and emery cloth.
　　4.當工件表面有毛刺時，建議去除凈毛刺并進行測量，否則會磨損測量工具，影響測量結果的準確性。
　　4. When there is burr on the surface of the workpiece, the burr must be removed and measured, otherwise the measuring tools will be worn and the accuracy of the measurement results will be affected.
　　5.的秘密。不要用手觸摸測量工具的測量表面，因為手上的汗水等潮濕、骯臟的東西會污染測量表面，使其生銹。不要將量具與其它量具、金屬材料混合使用，以免碰撞量具。
　　5. Do not touch the measuring surface of the measuring tool with your hand, because sweat and other wet and dirty things on your hand will pollute the measuring surface and make it rusty. Do not mix the measuring tool with other measuring tools and metal materials to avoid colliding with the measuring tool.
　　6.不要將卡尺的量具尖端用作劃針、指南針或其他工具。
　　6. Do not use the measuring tool tip of the caliper as a scriber, compass or other tool.
　　以上介紹了鋁型材測量工具的保養方法，想要了解更多關于鋁型材的相關產品信息，歡迎訪問網站：http://ssstlc.comThe maintenance methods of aluminum profile measuring tools are described above. For more information about aluminum profile products, please visit http://www.jndclyxgs.com